Filter
Top Products
Ring
(Part
No.
257137-6)
When cutting groove
1/4",
5/16",
3/8",
7/16",
1/2",
9/16"
or
5/8",
use this ring
or rings.
Table insert
(Part
No.
343396-9)
When cutting grooves
9/16"
or wider, use
this table insert instead
of
the standard
table insert.
Table saw stand
(Part
No.
STEX
122251
1
Place the stays on
a
level location and
assemble the legs inside. Secure with the
bolts and nuts, then attach the rubber caps
to the ends
of
the legs.
Now
set
the table saw on top
of
the
as-
sembled stand and secure with four bolts,
washers and nuts.
29