Filter
Top Products
Repair
Fig. 47
oval hole of
F/R change
lever
protrusion of
Switch
P 12 / 13
Maintenance program
It is recommended to replace the following parts shown below and apply lubricant to the specific parts designated in Figs.
2 and 3 when replacing Carbon brushes.
[3] DISASSEMBLY/ASSEMBLY
[3]-9. F/R Change Lever
Fit the protrusion of Switch into Oval hole of F/R change lever
and assemble them to Housing L. F/R change lever is symmetric
between right and left, therefore, it is not directional. (Fig. 47)
ASSEMBLING
1
Cap 35
40 O ring 16
38 Ring spring
28
29 Steel
ball 7.0
35 Cushion
ring 13
37 O ring 9