Filter
Top Products
Repair
P 4 / 13
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Change Lever
DISASSEMBLING
ASSEMBLING
Change lever Drill mode
Lock button
Pushing Lock button into Change lever,
turn Change lever fully to Drill mode
until it stops.
Remove Change lever by levering up it with Slotted head screwdriver,
inserted between Gear housing complete and Change lever.
Fig. 4 Fig. 5
Fig. 6 Fig. 7
Disassemble Change lever as illustrated in Figs. 4 and 5.
1) Assemble Change lever to Gear housing complete in the order of Figs. 6 and 7.
2) Make sure that Change lever stops at every operation mode exactly after assembling.
Lock plate
Drill mode
Hammer drill
mode
large pin of Change
lever
small pin
of Change
lever
Lock plate can be seen through the hole
for Change lever insertion before
mounting Change lever.
When inserting Change lever into Gear
housing complete, contact the small pin
to this Lock plate as designated in gray
color. Change lever can be inserted in
Hammer drill mode.
Pushing Lock button into Change
lever, turn Change lever fully
to Drill mode until it stops.
Pushing Lock button into Change
lever, tap Change lever.
Change lever can be assembled to
Gear housing complete.
Lock button