Filter
Top Products
[4] Maintenance program
It is recommended to replace the following parts at the same time when replacing Carbon brushes. (Fig. 55)
Note: Be sure to put Makita grease RB No. 00 and Molybdenum disulfide lubricant to the specific portions.
Refer to Figs. 1, 2 and 3.
Fig. 55
BHR262/ HR262D
BHR262T/ HR262TD
1
Cap 35
(286263-4)
29 Steel ball 7.0
(216022-2)
115 Steel ball 7.0
(216022-2)
35 Cushion ring 13
(421955-0)
37 O ring 9
(213073-6)
38 Ring spring 28
(233917-4)
40 O ring 16
(213227-5)
111 Cap 35
(286263-4)
40 O ring 16
(213227-5)
35 Cushion ring 13
(421955-0)
37 O ring 9
(213073-6)
38 Ring spring 28
(233917-4)
Repair
P 19/22