Filter
Top Products
OM-193 267 Page 27
SECTION 5 − PROGRAMS
. Section 5-1 provides basic information on each of the fifteen programs in the unit’s memory. See Section 5-2 for more detailed information on each
of the programs.
. Synergic Information: The manufacturer makes no warranties, express or implied, that welds made using the synergic parameters of this equip-
ment will meet the requirements of the application.
The synergic parameters contained in this equipment are intended only to be a general guideline. The choice and use of any synergic setting must
be tested as to its suitability for the application.
5-1. Overview of Programs
Program # Wire Type Wire Size Shielding Gas IPM: Min IPM: Max
1 Steel .035 in Ar/CO
2
80 750
2 Steel .045 in Ar/CO
2
80 750
3 Steel .052 in Ar/CO
2
70 750
4 Steel .062 in Ar/CO
2
60 400
5 Stainless .035 in 98Ar/2CO
2
100 750
6 Stainless .045 in 98Ar/2CO
2
90 750
7 4043AL .035 in Argon 240 840
8 4043AL .047 in Argon 150 750
9 4043AL .062 in Argon 120 520
10 5356AL .035 in Argon 350 850
11 5356AL .047 in Argon 200 750
12 5356AL .062 in Argon 180 580
13 Nickel .035 in 75Ar/25He 120 670
14 Nickel .045 in 75Ar/25He 100 600
15 Silicon Bronze .035 in Argon 120 750
16 Metal Core .045 in Ar/CO
2
100 750
17 Metal Core .052 in Ar/CO
2
50 750
18 Metal Core .062 in Ar/CO
2
50 500