Filter
Top Products
18 OM-402
4.2 Connecting Battery and Installing Exhaust Pipe
ST-801 079-A / Ref. ST-175 918-C
7/16, 1/2 in
+
−
Y Connect negative (−)
cable last.
Tools Needed:
Y Stop engine.
. Installation of exhaust pipe is
optional.
4.3 Engine Prestart Checks
Ref. ST-159 219-D
Check all fluids daily. Unit must be
cold and on a level surface. Oil may
be added at either oil fill.
Engine stops if oil pressure is low.
Y Heavy loading during first 50
hours will damage engine.
Keep load less than 225A
(weld) or 7 kVA (power) for
first 50 hours.
1 Exhaust Pipe
If unburned fuel and oil collect in ex-
haust pipe during run-in, see Sec-
tion 9.
Full
1
Diesel
Full