Filter
Top Products
58 OM-303
12. Options and Accessories
12.1 Metro 250D
WELD METERS − DC AMP & VOLT
(#042 947 Field)
Machine is prewired for easy installation of
field kit.
STARTING AID KITS
(#043 139 Field)
Improve starting in cold weather by adding
air intake manifold glow plug. Machine is
prewired.
SPARK ARRESTOR
(#042 915)
May be mandatory in some areas.
METRO RUNNING GEAR
(#042 941)
Easy-to-install running gear bolts onto Metro
base. Not for highway use. Includes axle,
wheels, fenders and tow bar.
LOCK UP KIT − FRONT PANEL
(#042 921)
Secures the front panel controls of the Metro
with a hinged metal panel. Includes key lock
for engine access cover.
CC-5 CANVAS COVER
(#040 144)
Heavy duty, blue, waterproof and mildew
resistant.
RHC-14 REMOTE HAND CONTROL
(#129 340)
Miniature hand control for remote current
and contactor control. Includes 20 ft. (6 m)
cord and 14-pin plug.
RFC-14 REMOTE FOOT CONTROL
(#129 339)
Heavy duty foot current and contactor
control. Includes 20 ft. (6 m) cord and 14-pin
plug.
VOLTAGE-SENSING WIRE FEEDER
SUPER S-32P COMPACT, PORTABLE
WIRE FEEDER
Literature Index No. M/6.26
For 0.23−5/64 in. (0.6−2.0 mm) hard and flux
cored wire.
HF-251 SERIES
High Frequency Arc Starter and Stabilizer
(#042 388) HF-251D-1 115 Volt
(#042 387) HF-251-2 230 Volt
A portable 250 Amp unit for 50, 60, and 100
Hz input.
3000-4AH FOUR-WHEEL TANDEM
TRAILER
(#042 599)
The tandem axle design enables this trailer
to ride smoothly over rough terrain. The unit
is equipped with fenders, lights, a leveling
jack, and safety chains. The two-wheel,
self-actuating hydraulic brake system
operates automatically as pressure is put
against the tongue of the trailer. Break-away
device automatically locks the brakes if the
trailer becomes loose. A hand-operated
parking brake is standard.
NOte: Order hitch separately.
TOOL BOX
(#040 638)
For use with four-wheel trailers. Keeps tools
handy. Sturdy steel construction with hinged
cover. 5 in. (130 mm) divider in center of
box. Attachment hardware included. Height
11 in. (280 mm), depth 10 in. (254 mm),
length 44 in. (1120 mm).
EDT 2400-2B TWO-WHEEL TRAILER
(#042 895)
A 1089 kg (2400 lb.) capacity trailer has a
welded structural steel frame, heavy-duty
axle with roller bearing hubs and leaf spring
suspension. Mounting holes for all large
Miller engine driven welding generators are
prepunched. Mounting hardware provided.
Also included is a jack stand for raising and
lowering the tongue, safety chains, and
universal tongue mounting for optional
hitches. An optional fender and light kit is
required when trailer is used on the highway.
Note: Order hitch separately.
The EDT 2400-2B trailer and the No.
3000-4AH trailer, when equipped with
fender and light kit and 50 mm (2 in.) ball
hitch, conform to all applicable U.S.
Federal Motor Vehicle Safety Standards
in effect on date of manufacture.
FENDER AND LIGHT KIT FOR EDT
2400-2B TRAILER
(#042 896)
Includes fenders, 12 Volt lights, and
mounting hardware.
NO. 84X FOUR-WHEEL TANDEM
TRAILER
(#042 150)
For off-the-road use only. The tandem axle
torsion bar design enables this trailer to ride
smoothly over rough terrain.
Note: Order hitch separately. When
ordering off-road trailers, the purchase
order must include the statement, “For
off-the-road use only.”
FENDER AND LIGHT KIT FOR NO. 84X
TRAILER
(#042 198)
Includes fenders and 12 Volt light set.
HITCHES
CLEVIS (#042 151)
For use on No. 84X trailer. Shipping weight 5
kg (11 lbs.)
CLEVIS (#042 707)
(Not for highway use) For use with EDT
2400-2B trailer. Shipping weight 11 lbs. (5
kg)
50 mm (2 in.) BALL (#042 153)
For use with No. 84X and 3000-4AH trailers.
Shipping weight 5 lbs. (2 kg)
50 mm (2 in.) BALL (#042 705)
For use with EDT 2400-2B trailer. Shipping
weight 5 lbs. (2 kg)
76 mm (3 in.) LUNETTE EYE
(#042 152)
For use with No. 84X and 3000-4AH trailers.
Shipping weight 9 lbs. (4 kg)
64 mm (2-1/2 in.) LUNETTE EYE
(#042 706)
For use with EDT 2400-2B trailer. Shipping
weight 9 lbs. (4 kg)