Filter
Top Products
OM-4411 Page 25
6-4. Remote Amperage/Voltage Control
1 Remote Receptacle RC4
Connect optional remote control to
RC4 (see Section 5-8).
2 Remote Hand Control (Optional)
3 Remote Foot Control (Optional)
. Engine runs at weld speed when
a device connected to the remote
receptacle makes closure be-
tween pins A and B (example:
trigger pull on MIG gun).
Process = Stick (Using Remote On/Off)
In Example:
2
Max = 180 A CC/DC
Min = 40 A CC/DC
Max (180 A DC)
Min (40 A DC)
Set V/A Adjust
Switch
Set
V/A Control
Adjust Remote Control
(Stick Welding Only)
3
1
Set Process
Example: Combination Remote Amperage Control (Stick)
803 128 / 211 909 / S-0769 / S-0774
. This unit does not have remote con-
tactor control. Output is always on.