Filter
Top Products
OM-492 Page 13
4-2. Dimensions, Weights, and Operating Angles
Dimensions
A
Height 36 in (914 mm)
B
C
Width 24 in (610 mm)
C
! D t d tilt l i ld
Depth 59 in (1499 mm)
D
! Do not exceed tilt angles or engine could
be damaged or unit could tip.
A 23-5/8 in (600 mm)
4 Holes
G
gp
! Do not move or operate unit where it could
tip
B 21-1/2 in (546 mm)
4 H
o
l
es
ti
p.
C 1 in (25 mm)
E
F
D 15-5/8 in (397 mm)
F
20°
E 26-3/8 in (679 mm)
20
°
F 58-3/4 in (1492 mm)
20°
20°
20°
G 13/32 in (10 mm) Dia.
20°
Weight
925 lb (420 kg)
Front Panel End
925 lb (420 kg)
800 426
Front Panel End
6 Minutes Welding 4 Minutes Resting
4-3. Duty Cycle And Overheating
Duty Cycle is percentage of 10 min-
utes that unit can weld at rated load
without overheating.
If unit overheats, output stops, a
Help message is displayed (see
Section 8-10), and cooling fan runs.
Wait fifteen minutes for unit to cool.
Reduce amperage or voltage, or
duty cycle before welding.
NOTICE − Exceeding duty cycle
can damage unit and void warranty.
60% Duty Cycle
Overheating
0
15
A or V
OR
Reduce Duty Cycle
Minutes
sduty1 5/95 / 196 698