Miller Electric 1251 Welder User Manual


 
. A complete Parts List is available at www.MillerWelds.com
OM-201 872 Page 41
7-5. Checking Or Replacing Filter Element
1 Latch
2 Filter Cup
3 Retaining Nut
4 Filter Element
5 Defuser Ring
6 Filter Cap
Slide latch down, and rotate filter
cup approximately 1/4 turn.
Remove cup.
Remove retaining nut, filter
element, and defuser ring.
Check filter element for dirt and
moisture, and replace if necessary.
Be sure that all parts are clean and
dry.
Reinstall all parts, and secure filter
cup.
6
5
4
3
1
2
804 054-A