Filter
Top Products
OM-1599 Page 13
4-5. Connecting Welding Gun And Voltage Sensing Clamp
Ref. 802 706-A / 802 768-A / Ref. S-0621-C
Y Turn Off wire feeder and
welding power source. Stop
engine on welding
generator.
1 Gun Securing Knob
2 Gun Block
3 Gun Outlet Wire Guide
Loosen knob, insert gun end into
block. Position outlet wire guide as
close as possible to drive rolls with-
out touching. Tighten knob.
4 Gun Trigger Plug
5 Gun Trigger Receptacle
6 Voltage Sensing Clamp
Connect voltage sensing clamp to
workpiece.
1
2
4
5
Internal Side View
6
3
4-6. Connecting Shielding Gas
801 155-A / Ref. 802 770
1 Gas Hose With 5/8-18
Right-hand Thread Fittings
(Customer Supplied)
2 Shielding Gas Cylinder
3 Valve
4 Flowmeter
Close valve on cylinder when fin-
ished welding.
Tools Needed:
5/8 in
1
Rear View
2
3
4