Miller Electric 301 G, DC Welding System User Manual


 
OM-4407 Page 17
5-3. Engine Prestart Checks (Kohler-Powered Units)
801 221 / 802 849-A
Full
Check all fluids daily. Engine must be
cold and on a level surface. Unit is
shipped with 10W30 engine oil.
. Follow run-in procedure in engine
manual.
. This unit has a low oil pressure
shutdown switch. However, some
conditions may cause engine
damage before the engine shuts
down. Check oil level often and do
not use the oil pressure shutdown
system to monitor oil level.
Fuel
Add fresh fuel before starting engine
the first time (see maintenance label for
specifications). Always leave filler
neck empty to allow room for expan-
sion. Check fuel level on a cold engine
before use each day.
Oil
Check oil with unit on level surface. If
oil is not up to full mark on dipstick, add
oil (see maintenance label).
. To improve cold weather starting:
Keep battery in good condition.
Store battery in warm area.
Use correct grade oil for cold
weather.
Full
Gasoline