Miller Electric 301 G, DC Welding System User Manual


 
OM-4407 Page 36
SECTION 9 MAINTENANCE (KOHLER-POWERED UNITS)
9-1. Routine Maintenance (Kohler-Powered Units)
Recycle
engine
fluids.
Y Stop engine before maintaining.
. See also Engine Manual and Maintenance Label for im-
portant start-up, service, and storage information. Ser-
vice engine more often if used in severe conditions.
* To be done by Factory Authorized Service Agent.
Every 8 h
Wipe up spills.
Check fluid levels.
See Section 5-3.
OIL
Full
Every 20 h Every 25 h
Check and clean
spark arrestor screen.
See Section 9-4.
Service air filter wrapper
(foam element). See
Section 9-3.
Every 50 h
Clean and tighten
weld terminals.
Every 100 h
Change oil. See
Section 9-5 and
maintenance
label.
Clean cooling system. See
engine manual.
Service air filter element.
See Section 9-3.
Clean and
tighten battery
connections.
Every 200 h
Replace fuel
filter. See
Section 9-5.
Change oil filter.
See Section 9-5
and maintenance
label.
Replace
unreadable
labels.
Check spark plugs.
Every 500 h
Repair or
replace cracked
cables.
Service welding generator
brushes and slip rings.
Service more often in dirty
conditions.*
Every 1000 h
Blow out or vacuum inside. During
heavy service, clean monthly.
OR