Filter
Top Products
OM-4407 Page 25
6-3. Remote Amperage/Voltage Control
1 Remote Receptacle RC4
Connect optional remote control to
RC4 (see Section 5-9).
2 Remote Hand Control (Optional)
3 Remote Foot Control (Optional)
. Engine runs at weld/power speed
in Wire and TIG modes whenever
a device connected to the remote
receptacle makes closure be-
tween pins A and B (exam-
ple:trigger pull on MIG gun).
802 850 / 206 422 / S-0769 / S-0774
Process = Stick (Using Remote On/Off)
In Example:
2
Max = 180 A CC/DC
Min = 40 A CC/DC
Max (180 A DC)
Min (40 A DC)
Set V/A Adjust
Switch
Set
A/V Control
Adjust Remote Control
(Stick Welding Only)
3
1
Select Polarity By
Using DC Polarity/AC
Switch (If Present) Or
By Changing Cable
Connections
Switch
present on
AC/DC
models
only.