Filter
Top Products
5 Applied Functions
5.1 Type Conversion Functions
80
FXCPU Structured Programming Manual
(Application Functions)
5.1.23 REAL_TO_INT(_E)
Outline
This function converts float (single precision) data into word [signed] data, and outputs the data obtained by
conversion.
1. Format
*1. Output variable
2. Set data
In explanation of functions, I/O variables inside ( ) are described.
Explanation of function and operation
This function converts float (single precision) data stored in a device specified in into word [signed] data,
and outputs the data obtained by conversion to a device specified in .
Cautions
1) Use the function having "_E" in its name to connect a bus.
2) When handling 32-bit data in structured programs, you cannot specify 16-bit devices directly, different
from simple projects. Use labels when handling 32-bit data.
You can specify 32-bit counters directly, however, because they are 32-bit devices.
Use global labels when specifying labels.
3) The function is provided in the FX
3G Series Ver.1.10 or later.
4) In the data obtained by conversion, the portion after the decimal point of the float (single precision) data
(source data) is rounded off.
FX3U(C) FX3G FX2N(C) FX1N(C) FX1S
FX
U
/FX
2C
FX0N FX0(S)
Function name
Expression in each language
Structured ladder ST
REAL_TO_INT
REAL_TO_INT(a_real);
Example:
D10:=
REAL_TO_INT(Label);
REAL_TO_INT_E
REAL_TO_INT_E(EN,a_real,
Output label);
Example:
REAL_TO_INT_E(X000, Label,
D10);
Variable Description Data type
Input
variable
EN Execution condition Bit
a_real ( )
Conversion source float (single precision) data FLOAT (Single Precision)
Output
variable
ENO Execution status Bit
*1 ( )
Word [signed] data after conversion Word [signed]
REAL_TO_INT
a_real *1
D10Label
REAL_TO_INT_E
EN ENO
*1
D10
X000
Label
a_real
s
d
s
d
1234.0 1234
Float (single precision) data Word [signed] data
The portion after the decimal
point is rounded off.