Filter
Top Products
MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAGE 7
MQ SP-3035 CONCRETE SAW
SAFETY
FOR YOUR SAFETY AND THE SAFETY OF OTHERS!
NOTE
This Owner's Manual has been developed to provide instructions for the
safe and efficient operation of the Multiquip SP-3035 CONCRETE SAW.
For engine maintenance information, please refer to the engine
manufacturers’ instructions for data relative to its safe operation.
Before using this CONCRETE SAW, ensure that the operating individual
has read and understands all instructions in this manual.
Safety precautions should be followed at all times when operating this equipment. Failure to read and
understand the Safety Messages and Operating Instructions could result in injury to yourself and others.
SAFETY MESSAGE ALERT SYMBOLS
The three (3) Safety Messages shown below will inform you about potential hazards that could
injure you or others. The Safety Messages specifically address the level of exposure to the
operator, and are preceded by one of three words: DANGER, WARNING, or CAUTION.
DANGER
DANGER: You WILL be KILLED or SERIOUSLY injured if you
DO NOT follow directions.
WARNING
WARNING: You CAN be KILLED or SERIOUSLY injured if you
DO NOT follow directions.
CAUTION
CAUTION: You CAN be injured if you DO NOT follow directions.
Potential hazards associated with SP-3035 Concrete Saw operation will be referenced with "Hazard
Symbols" which appear throughout this manual, and will be referenced in conjunction with Safety
"Message Alert Symbols".