Filter
Top Products
11-2 User’s Reference Guide
General status
Current Date: The current date; this can be set with the Date and Time utility (see “Date and Time” on
page 7-13).
Default IP Gateway: The router’s default gateway, which may be either manually configured or learned via
DHCP. This is the value you assigned in the Default IP Gateway field on page 6-8. If you are using the router’s
defaults (DHCP and NAT) this value will be 0.0.0.0. If you have assigned an IP address as your default gateway,
it is shown here.
CPU Load: Percentage of the system’s resources being used by all current transmissions.
Unused Memory: The total remaining system memory available for use.
Domain Name Server: If you are using the router’s defaults (DHCP and NAT) this value will be 0.0.0.0. If you
have assigned an IP address as your default gateway, it is shown here.
Call Acct: Shows whether you have enabled or disabled the call accounting features.
Domain Name: the domain name you have assigned, typically the name of your ISP
MAC Address: The Netopia R310’s hardware address, for those interfaces that support DHCP.
IP Address: The Netopia R310’s IP address, entered in the IP Setup screen.
Quick View 8/13/1998 03:29:57 PM
Default IP Gateway: 163.176.8.1 CPU Load: 3% Unused Memory: 646 KB
Domain Name Server: 163.176.4.31 Call Acct: Disabled
Domain Name: netopia.com
----------------MAC Address--------IP Address---------------------------------
Ethernet Hub: 00-00-c5-70-03-48 192.168.1.1
Current WAN Connection Status
Profile Name----------Rate--%Use-Remote Address-----Est.-More Info------------
LED Status
PWR-+-----WAN1------+--CON--AUX--+-----WAN2------+--EN--+--------LEDS---------
LNK RDY CH1 Ch2 LNK LNK LNK RDY CH1 CH2 DATA | '-'= Off 'G'= Green
G - - - - - - - - - - Y | 'R'= Red 'Y'= Yellow