Filter
Top Products
16
UNPACKING AND ASSEMBLY
OREGON® Cordless Tool System
TRIMMER/EDGER MODEL ST275
AB 0214 - F/N 564571
UNPACKING AND ASSEMBLY
UNPACKING
WHAT’S IN THE BOX?
The trimmer/edger requires some
assembly before use. These items ship
with the trimmer/edger:
• Trimmer/Edger
• Front handle
• Front handle adjustment knob
• Guard
• Charger and power cord (if so equipped)
• Battery (if so equipped)
After removing the trimmer/edger
from the box, inspect it carefully to
ensure no damage has occurred during
shipping and that no parts are missing.
If any parts are damaged or missing,
do not use the trimmer/edger. Contact
OREGON® Cordless Tool System to obtain
replacement parts. For country-specific
telephone numbers, see “Customer
service by country.”
ASSEMBLY
DANGER: TO AVOID SERIOUS
PERSONAL INJURY, DO NOT
OPERATE THE TRIMMER/EDGER
WITHOUT THE FRONT HANDLE AND
GUARD ATTACHED.
WARNING: A BATTERY OPERATED
TOOL WITH THE BATTERY PACK
INSERTED IS ALWAYS ON AND CAN
START ACCIDENTALLY. REMOVE THE
BATTERY PACK FROM THE TRIMMER/
EDGER BEFORE ATTACHING THE
GUARD AND FRONT HANDLE.
ATTACHING THE FRONT HANDLE
The front handle fits on the shaft at a
comfortable distance between the rear
handle and the trimmer motor housing
(Fig. ).
• Grip the front handle near the clamping
point ().
• Snap the front handle onto the shaft
so that the clamp is nearest the rear
handle ().
• Insert the front handle adjustment knob
through the hole on the front handle ()
and tighten.
2
1
3
FIG. 2