Ref.No.1E Procedure 1A →
→→
→ 1B →
→→
→ 1D →
→→
→ 1E Removal of Gear Case Assembly.
1. Take out the mode change handle.
2. Pull out 2 pins (
2.5×33.6).
3. After removing pins, the internal parts of the
gear case assembly can be removed one after
another.
thrust plate → clutch gear → planet gear (3pcs)
→ carrier → thrust plate
4. Remove adjusting screw, clutch spring, and
clutch plate.
5. After removing the clutch plate, 6 pieces of
steel ball come off.
5
EY6535-U1