Filter
Top Products
Ref.No.2B Procedure 2A→
→→
→2B Assembly of Motor Mounting Base.
NOTE :
After loosening these screws, please replace
them with new screws. The old screws have
an adhesive that can not be reapplied. New
screws are identified with blue adhesive.
1. Tighten 3 screws of the motor mounting base.
2. Assemble planet gears and pins with the
revolving stand and insert them into the motor
mounting base.
3. The ring gear has its own correct direction.
Confirm the direction when the ring gear is
inserted into the motor mounting base.
4. Adjust the protrusion parts of ring gear with
the groove parts of motor mounting base.
7
EY6535-U1