Filter
Top Products
4 ASSEMBLY INSTRUCTIONS
Ref.No.2A Procedure 2A Assembly of Gear Case Block.
1. Assemble thrust plate, clutch gear, planet gear
(3pcs), carrier, thrust plate and insert pins (2pcs).
2. Reinstall one piece of steel ball into each of 6
holes.
3. Assemble clutch plate and clutch spring.
4. Align the widest protrusion of adjusting screw
with the narrower protrusion of gear case.
5. Turn the adjusting screw into the gear case
assembly one rotation for clockwise direction.
6. Set the mode change handle on the wider
protrusion of gear case.
7. Confirm proper position of the mode change
handle that both ends of spring must be put into
the grooves of the driving carrier.
6
EY6535-U1