Filter
Top Products
Patton Website 22
SmartNode Branch eXchange User Manual 4 • WMI and Controls
Patton Website
The Patton drop down is used for generic and general settings in the SNBX, it is marked with the icon.
The ‘Patton Website’ launches windowed version of the Patton homepage found at: http://www.patton.com.
Reboot
The ‘Reboot’ button triggers a full warm restart of MS Windows and Services upon confirmation.
About
The ‘About’ button shows version information.
IP Settings
The IP Settings dropdown is used for IP Based settings of the TCP/IP Stack on the Windows Server. For 3CX
IP Settings, you must refer to the 3CX GUI.
IP Configuration
The ‘IP Configuration’ button enables you to enter new IP Address, Subnet Mask, and Gateway.
Current IP Settings
The ‘Current IP Settings’ shows you the output of an 'ipconfig /all' command on the SNBX itself.
3CX Management (SNBX*/W3CX only)
The 3CX Management drop down is only available on SNBX Versions utilizing 3CX. It is where PBX specific
configurations are found.
3CX Settings
The ‘3CX Settings’ button will launch a windowed version of the 3CX Gui, for full page configuration you can
navigate directly to http://ipaddress:5000/3cx.aspx
3CX Reports
The ‘3CX Reports’ button will launch a windowed version of the 3CX GUI, for full page configuration you
can navigate directly to http://ipaddress:5000/reports/