Powermatic DT45 Welder User Manual


 
8
Unpacking
Open shipping container and check for shipping
damage. Report any damage immediately to
your distributor and shipping agent. Do not
discard any shipping material until the dovetailer
is assembled and running properly.
Remove the box from inside the cabinet.
Compare the contents of your container with the
following parts list to make sure all parts are
intact. Missing parts, if any, should be reported
to your distributor. Read the instruction manual
thoroughly for assembly, maintenance and
safety instructions.
Contents of the Shipping Container
1 Dovetail Machine
2 Clamping Handles (with hex nuts)
1 Set of Open-Ended Wrenches (8-10, 11-13,
12-14 and 17-19mm)
1 Set of Hex Wrenches (1.5 to 6mm)
2 Sample Dovetailed Boards
1 Owner's Manual
1 Warranty Card
Read and understand the entire contents of this manual before attempting set-up
or operation! Failure to comply may cause serious injury.