Filter
Top Products
11
Unpacking and Checking Contents
1. Remove tool from carton by lifting unit.
2. Place the tool on a secure, stationary
work surface and look the tool over
carefully.
WARNING: For your own safety,
never connect plug to power
source outlet, or insert switch
key until all assembly steps are
complete and until you have read
and understood the entire own-
ers manual.
WARNING: To reduce the risk of
injury, if any parts are missing,
do not attempt to assemble the
sander, plug in the power cord,
or turn the switch on until the
missing parts are obtained and
installed correctly.
List of Loose Parts
NOTE: Before beginning assembly, check
that all parts are included. If you are miss-
ing any part, do not assemble the sander.
Call 1-866-539-1710 or E-mail us at
info@ridgidwoodworking.com if any parts
are damaged or missing. Sometimes
small parts can get lost in packaging
material. Do not throw away any packag-
ing until sander is put together. Check
packaging for missing parts before con-
tacting RIDGID.
Item Description Qty.
A Oscillating Edge Belt/
Spindle Sander................................ 1
B Spacer Ring Inserts
1/2" I.D. ........................................... 1
1" I.D. ..............................................1
1-1/2" I.D. ........................................ 1
2" I.D. ..............................................1
CDrums
3/4" x 4-1/2"..................................... 1
1" x 4-1/2"........................................ 1
1-1/2" x 4-1/2" ................................. 1
2" x 4-1/2"........................................ 1
D Sandpaper Sleeves
1/2" x 4-1/2"..................................... 1
3/4" x 4-1/2"..................................... 1
1" x 4-1/2"........................................ 1
1-1/2" x 4-1/2" ................................. 1
2" x 4-1/2"........................................ 1
E Sanding Belt (Installed)
4" x 24"............................................ 1
F Insert ............................................... 1
G Operators Manual ........................... 1
H Bag of Loose Parts
Containing the following parts:
Rubber feet ........................................4
Washer, Flat 21/64 x 1-3/4 x 1/8 ........1
Washer, Flat 21/64 x 7/8 x 3/64 .........1
Washer, Flat 21/64 x 5/8 x 1/32 .........1
Switch Key ......................................... 1
Hex “L” Wrench 3/32.......................... 1
Hex “L” Wrench 5/32.......................... 1
Loose Parts
NOTE: The sander is shipped with the 4" x 24" sanding belt attached.
NOTE: Parts shown are not
actual size.
A
1/2"
E
Spacer Ring Inserts
1"
1-1/2" 2"
B
Drums and Sandpaper Sleeves
1/2" 3/4" 1"
1-1/2
"
2"
CD
GH
F