Filter
Top Products
29
Maintenance
WARNING: For your own safety,
turn switch “OFF” and remove
plug from power source outlet
before adjusting or maintaining
your sander.
WARNING: To reduce the risk of
electrocution or fire, any repairs
to electrical systems should be
done only by qualified service
technicians. Unit must be reas-
sembled exactly to factory speci-
fications.
If power cord is worn or cut, or damaged
in anyway, have it replaced immediately.
Frequently blow out or vacuum out any
dust that may accumulate inside the
motor.
Lubrication
All bearings in tool are self-lubricating.
They require no further lubrication.
RIDGID
Recommends the Following Accessories
WARNING: Use only accesso-
ries recommended for this
sander. Using other accessories
may be dangerous.
Item SKU No.
Miter Gauge.................................AC1021
Switch Key................................... AC1000
Universal Legset.......................... AC9910
Replacement Sanding
Sleeves, 2 pk.................See Chart Below
Do not use any accessory unless you
have received and read complete instruc-
tions for its use.
NOTE: 4" x 24" Replacement sanding
belts are available at you local Home
Depot Store.
Wiring Diagram
Size Grit SKU No. Size Grit SKU No.
1/2" Fine
Medium
Coarse
AC7001
AC7002
AC7003
1-1/2" Fine
Medium
Coarse
AC7010
AC7011
AC7012
3/4" Fine
Medium
Coarse
AC7004
AC7005
AC7006
2" Fine
Medium
Coarse
AC7013
AC7014
AC7015
1" Fine
Medium
Coarse
AC7007
AC7008
AC7009
Motor
Ground
Screw
Black
Red
Relay
White
Switch
White
Black
Green
M
AL