Filter
Top Products
$;4=,7$,B$,10?D#@70>
:7/?::7-D49>@7,?0/2=4;;492>@=1,.0>
B309;0=1:=8492,9:;0=,?4:9B30=0?30
.@??492?::78,D.:9?,.?34//09B4=492:=
4?>:B9.:=/Contact with a "live" wire will
make exposed metal parts of the tool "live"
and shock the operator. If cutting into existing
walls or other blind areas where electrical
wiring may exist is unavoidable, disconnect
all fuses or circuit breakers feeding this
worksite.
7B,D>8,60>@=0?30B:=6>@=1,.04>1=00
1=:89,47>,9/:?30=1:=0429:-50.?>
Cutting into a nail can cause the bit and the
tool to jump and damage the bit.
0A0=3:7/?30B:=6;40.049:903,9/,9/
?30?::749?30:?30=3,9/B30949@>0
0A0=;7,.03,9/>90,=:=-07:B.@??492
>@=1,.0 Clamping the material and guiding
the tool with both hands is safer.
0A0=7,D B:=6;40.0 :9 ?:; :1 3,=/
>@=1,.0>7460.:9.=0?0>?:900?.
Protruding cutting bit may cause tool to jump.
7B,D>B0,=>,10?D2:2270>,9//@>?
8,>6&>0:97D49B077A09?47,?0/,=0,
Using personal safety devices and working in
safe environment reduces risk of injury.
1?0=.3,92492?30-4?>:=8,6492,9D
,/5@>?809?>8,60>@=0?30.:770?9@?,9/
,9D :?30= ,/5@>?809? /0A4.0> ,=0
>0.@=07D?423?090/ Loose adjustment
device can unexpectedly shift, causing loss
of control, loose rotating components will be
violently thrown.
0A0=>?,=??30 ?::7 B309 ?30 -4? 4>
092,20/49?308,?0=4,7 The bit cutting
edge may grab the material causing loss of
control of the cutter.
7B,D>3:7/?30?::7B4?3?B:3,9/>
/@=492>?,=?@;. The reaction torque of the
motor can cause the tool to twist.
(309=:@?492:=.@??492?30/4=0.?4:9:1
100/B4?3?30-4?J>.@??4920/2049?:?30
8,?0=4,74>A0=D48;:=?,9?7B,D>100/
?30-4?49?:?308,?0=4,749?30>,80
/4=0.?4:9,>?30.@??4920/204>0C4?492
1=:8?308,?0=4,7When viewing the tool
from the top, the bit rotates clockwise. If the
tool is between the workpiece and your body,
then feed the tool to your right. If the
workpiece is between the tool and your body,
then feed the tool to your left. Feeding the
tool in the wrong direction causes the cutting
edge of the bit to climb out of the work and
pull the tool in the direction of this feed.
0A0=@>0/@77:=/,8,20/-4?>$3,=;
-4?>8@>?-03,9/70/B4?3.,=0 Damaged
bits can snap during use. Dull bits require
more force to push the tool, possibly causing
the bit to break.
0A0=?:@.3?30-4?/@=492:=4880/4,?07D
,1?0=?30@>0 After use the bit is too hot to
be touched by bare hands.
0A0=7,D?30?::7/:B9@9?47?308:?:=
3,>.:80?:,.:8;70?0>?,9/>?477 The
spinning bit can grab the surface and pull the
tool out of your control.
0A0= @>0 -4?> ?3,? 3,A0 , .@??492
/4,80?0=2=0,?0=?3,9?30:;0949249?30
-,>0
:9:?@>0?30?::71:=/=477492;@=;:>0>
This tool is not intended to be used with drill
bits.
7B,D>@>0?30?::7B4?3?30/0;?32@4/0
>0.@=07D,??,.30/,9/;:>4?4:90/17,?
,2,49>?8,?0=4,7-0492.@? The guide
securely positioned on the material improves
the stability and control of your tool.
BIT
WORK
DIRECTION OF
FEED
START
HERE
-4-
RZ 2610001563 07-09:RZ 2610001563 07-09 7/24/09 10:13 AM Page 4