Filter
Top Products
7
Use a dedicated power source (a dedicated circuit with a breaker) as indicated on the rating label
attached to the unit. A branched circuit may cause fire resulting from abnormal heating.
Connect the power supply plug to the power source firmly after removing the dust on the plug.
A dusty plug or improper insertion may cause a heat or ignition.
Never store corrosive substances such as acid or alkali in this unit if the container cannot be
sealed. These may cause corrosion of inner components or electric parts.
Check the setting when starting up of operation after power failure or turning off of power
switch. The stored items may be damaged due to the change of setting.
Be careful not to tip over the unit during movement to prevent damage or injury.
Prepare a safety check sheet when you request any repair or maintenance for the safety of service
personnel.
Wear rubber gloves when handling the H
2
O
2
reagent. Direct contact with the H
2
O
2
reagent may
result in inflammation of the skin.
H
2
O
2
decontamination can be performed only for the chamber and chamber attachments with
standard specifications, and not for any other objects.
Perform H
2
O
2
decontamination with the chamber attachments arranged as specified by Sanyo.
Arranging them in a different way may result in insufficient decontamination.
After H
2
O
2
decontamination has been completed, wear rubber gloves and use a non-woven cloth
to wipe off the residual H
2
O
2
fluid from the bottom of the chamber, any objects that were
decontaminated, and the bottoms of ducts.
CAUTION