Sears 113.24611 Drill User Manual


 
getting
tO kr ow
SPLINES
(GROOVES)
SPINDLE
QUILL _
RACK
(TEETH)
CHUCK __-_ CHUCK
KEY _
QUILL AND SPINDLE ASSEMBLY
INSIDE OF DRILL PRESS
SPINDLE SPEED CHART
9
CHUCK KEY ... is used to tighten or loosen the
chuck. It has a spring loaded EJECTOR pin to "pop'"
it out of the chuck when you let go of it. When not in
use, ALWAYS store the key in the hole in the table.
10
CHUCK LOCKING COLLAR ... draws the chuck
onto the spindle nose.
it prevents the chuck from coming loose during
operation. ALWAYS have the collar tightened.
11
"ON-OFF" SWITCH for drill has locking feature.
THIS SHOULD PREVENT UNAUTHORIZED AND
POSSIBLY HAZARDOUS USE BY CHILDREN
AND OTHERS.
Insert KEY into switch. NOTE: Key is made of
yellow plastic.
t3