Filter
Top Products
BATrERT
PACK
BATrlERY
PORT
To stop,release switchtriggerand allow the chuckto come
to a completestop.
_1= WARNING: Battery tools ere always in operating
cond_on. Therefore, switchshould always be locked
when notIn use orwhen cerwIng at yourside.
DIRECTIONOF
ROTAllONSELECTOR
(FORWARD/ REVERSE)
REVERSE
!
FORWARD
CENTERPOSITION
(lOCK) SWITCHTRIGGER
DEPRESSLATCHESTO
RELEASEBATTERYPACK
F'_.4
SWITCH
See Figure5.
Your ddi]starts and stopsby depressingand releasingthe
switchtrigger.Release the switchbigger to turn ddllOFF.
VARIABLE SPEED
See Figure5.
Your ddll has a variable speed feature in the switch. The
switch delivem higher speed and torque with increased
tdgger pressure. Speed is controlled by the amount of
switchtrigger depression.
SWITCH LOCK
See Figure5.
The switchtriggercan be lockedIn the OFF position.This
feature helps reducethe possibilityof accidental starting
when notInuse.Tolockthe switchtrigger,placethe direct'on
of rotationselector in the center position.
REVERSIBLE
See Figure 5.
This tool is reversible.The directionof rotationis controlled
by a selector located abovethe switchtdgger. With the drill
held in normal operating position,the directionof rotation
selector should be positioned to the left of the switchfor
drilling.The ddflingdirectionisreversedwhen the selector is
to the right of the switch.When the selector Is In center
position, the switchtrigger is locked.
CAUTION: Toprevent gear damage,alwaysallowchuck
to come to a completestopbefore changing the directionof
rotat|on.
Fig.5
KEYLESS CHUCK
See Figure 6.
A keylasschuckhas been providedwithyourddllto allow for
eas_JIr_mJlatton and ramoval ot b_ts.As the name '_las,
youcan hand tighten or releasedrill bitsinthe chuckjaws.
Graspandholdthe collar of thechuckwithonehand.Rotate
the chuck body with your other hand. The arrows on the
chuck indicatewhich directionto rotate the chuck body in
orderto GRIP (_ghten)or RELEASE (ur_ck) theddll bit.
,_ WARNING: Do not hold _ chuck bodywithone
hand and use the power ot the drill to tightenchuck
jaws on drillbits. Chuck bodycouldslip inyour hand
or your hand could slip and coma In contact with
rotatingddit bit.This could causean accidentrasu_ng
in sedouspersonal injury.
RELEASE
(UNLOCK) KEYI.ESS
CHUCK
BIT
GRip
(TIGHTEN)
CHUCK
COLLAR
Fig. 6
tO