Filter
Top Products
SENCO TOOL & PARTS WARRANTY
This tool has been designed and constructed using
the highest standards of material and workmanship.
TOOL AND PARTS WARRANTY:
The length of this guarantee is one year from date of purchase by the original retail purchaser.
During this period, SENCO Products, Inc., will repair or replace at Senco’s option, any original part or parts
for the original retail purchaser. This will be done free of charge, provided the parts are determined
defective in materials or workmanship upon examination by a SENCO Authorized Warranty Service Center
(exception: rubber o-rings, seals and bits). Any replacement part provided will carry a warranty for the
balance of the period of warranty applicable to the part it replaces.
This warranty will be honored, only if:
A) No evidence of abuse, or failure to follow recommended operational maintenance, or modification of the
tool is present (read Operator Manual for use and maintenance instructions);
B) When repair or replacement of parts or tools is necessary, the original retail purchaser returns the
complete tool or part, with transportation prepaid, to the nearest SENCO Authorized Warranty Service
Center, with purchase receipt or other positive proof that the part or tool is within the warranty period.
THIS WARRANTY IS THE ONLY WARRANTY ON THIS TOOL, AND ALL OTHER WARRANTIES,
WHETHER ORAL, WRITTEN, EXPRESS, OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE
EXCLUDED. BUYER’S OR USER’S REMEDIES ARE SOLELY AND EXCLUSIVELY AS STATED
ABOVE. SENCO PRODUCTS, INC. SHALL IN NO EVENT BE LIABLE FOR INCIDENTAL, CONSE-
QUENTIAL, INDIRECT, OR SPECIAL DAMAGES. IN NO EVENT, WHETHER AS A RESULT OF A
BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL
SENCO’S LIABILITY EXCEED THE PRICE OF THE TOOL WHICH HAS GIVEN RISE TO THE CLAIM
OR LIABILITY. ANY LIABILITY CONNECTED WITH THE USE OF THIS TOOL SHALL TERMINATE
UPON THE EXPIRATION OF THE WARRANTY PERIOD SPECIFIED ABOVE.
Replacement of Tool Due to Natural Disaster
SENCO will also replace any tool destroyed by an Act of God such as flood,
earthquake, hurricane or other disaster resulting only from the forces of nature. Such a claim
will be honored provided that such original retail purchaser had previously submitted a com-
pleted warranty registration card, and then submits proof of ownership and an acceptable
statement describing such Act of God documented by an insurance carrier, police department,
or other official governmental source. To obtain instructions for filing a claim call 1-800-543-
4596.
SENCO PRODUCTS, INC.
CINCINNATI, OHIO 45244-1611 USA
ESPECIFICACIONES
TECNICAS
TECHNICAL
SPECIFICATIONS
Voltage 120v
Current 4.3 amps
Frequency 60Hz
RPM 0-3300
Weight 5 lbs.
Height 8”
Length 14
1/2
”
Width 2.6”
Fastener
50 screws
Capacity (one strip)
Fastener 1-2”
Range #6-#8
thrd.
DS200-AC
SPÉCIFICATIONS
TECHNIQUES
Voltaje 120v
Current 4.3 amps
Frequency 60Hz
RPM 0-3300
Peso (kg) 2.3
Alto (mm) 203
Largo (mm) 368
Profundidad 50mm
Capacidad 50 tornillos
para tornillos (una faja)
Gama de largos de 25 a 50mm
tornillos (1a 2 pulg) cuerpo
de rosca #6 a#8
DS200-AC
DS200-AC
Voltage 120v
Current 4.3 amps
Frequency 60Hz
TPM 0-3300
Poids (kg) 2.3
Hauteur(mm) 203
Longueur(mm) 368
Larguer 50mm
Capacité 50 vis
fixarions (une bande)
Longueurs 25 - 50mm
des de longueur
fixations corps fileté
#6 - #8