Filter
Top Products
-21-
Figure 25. Removing sanding belt.
The sanding belt will need to be changed if the
belt ever becomes worn or damaged.
To change the sanding belt, do these steps:
1. UNPLUG THE SANDER!
2. Remove the work stop bar and cover lock
knobs from the belt guard (Figure 24 on
table).
3. Slide belt guard off the sander as shown in
Figure 24.
4. Release the belt tension by moving the belt
tension lever to the “unlock” position.
5. Remove sanding belt as shown in Figure 25.
6. Install a new belt with the arrows in the
proper direction (Figure 25 white arrow),
tension it, and replace the belt guard.
Figure 24. Removing belt guard.
UNPLUG the power cord
when making any adjust-
ments during operation!
Otherwise, serious per-
sonal injury to you or oth-
ers may occur!
Lock Knobs
Work Stop
Tension Lever
Changing Sanding
Belt
Belt Rotation