Filter
Top Products
DG711 and DG511 Pipe Laser User Guide 13
CHAPTER
3
Preparation
Before
Operation
3
Powering the
Laser 3.1
Ni-MH Batteries 3.1.1
Installing/Removing the
batteries
1 Turn the battery-pack knob
counterclockwise. Lift the battery
pack from the pipe laser.
2 Plug the battery-pack in place
and turn the battery knob
clockwise.
Optional Alkaline Battery
Pack
1 Turn the battery-pack knob
counterclockwise. Lift the battery
pack from the pipe laser.
2 Pull out on the top of the side
clips then push down on them to
release them from the side-clip
catches.