Filter
Top Products
Safety Information
For detailed installation and operating instructions, follow the instructions
given in this manual for this laser.
Laser Safety 0.0.1
The maximum radiant power
output of this laser is less than
5 mW. Use only the targets
supplied with this product.
Controls are listed on the radiation
control drawings.
C
Warning – Use of controls
or adjustments
performance of
procedures other than
those specified may result
in higher dosage of laser
exposure.
To help you comply with your
government regulations, a laser
safety kit is supplied with every
laser. This kit contains operator
qualification cards and a sign that
should be posted near the laser
whenever it is in use.
As with any visible laser device,
observe the following safety rules:
• Never look directly into a laser
beam or point the beam into the
eyes of others. Set the laser at a
height that prevents the beam from
shining directly into people’s eyes.
• Do not remove any warning
signs from the laser.
• Make sure that only properly
trained people use this product.
• If service is required, which
results in the removal of the outer
protective cover, factory-trained
personnel must perform this.
Certification 0.0.2
The IEC and the United States
Government Center of Devices for
Radiology Health (CDRH) has
classified this laser as a Class
3R/3A laser product. This laser
complies with IEC/EN
60825-1:2001, CDRH 21 CFR
1040.10 and 1040.11.