Spectra UL633-1 Laser Level User Manual


  Open as PDF
of 31
 
5
Standard Features
X-Y-Z-grade entering – Step and Go mode
Quickly press and release button 2startsthegradeenteringmode.Bothgradevalueswillbeshown.
Press/releasebutton1 a grade reverse Y
Press/releasebutton2 a grade reverse X
Press/releasebutton3 a return to the standard display
Quickly press and release button 4toconrmtheselectedgradevalueand
return to the standard display
Press and hold button 6 or 7(left/right)tochangeX-axisgradevalueafterthecomma;pressandholdbuttons
6 + 7simultaneouslystartsX-axisquickchangemodewherethegradevalueinfrontofthecommawillbeset
to 0% and then starts changing in 1% increments.
Press and hold button 5 or 8
(up/down)forchangingY/Z-axisgradevalue;pressandholdbuttons5 + 8
simultaneouslystartsY/Z-axisquickchangemodewherethegradevalueinfrontofthecommawillbeset
to 0% and then starts changing in 1% increments.
Note: The speed of the grade value change increases with the amount of time the button is held down.
Note:
Thegradevalueforbothaxesincreasesin1.00%increments.Whenthegradevalueforeitheraxis
reachesitshighestamount,thegradevalueswitchestothelowestvalueforthataxis.Forexample,thevalue
switchesfrom+25%to-25%.
Thelaserwillself-leveltotherequiredgradepositionafterconrmingthegradechangewithbutton4.
Note
:Thebubblesymbolsatthelaser’sLCDwillashuntilthelaserhasbeenself-leveledtotherequested
grade position.
X-Y-Z-grade entering – Digit Select mode
Quickly press and release button 2 starts the grade entering mode. .
Bothgradevalueswillbeshown.
Press/releasebutton1 aquicksetto0%
Press/releasebutton2 a change the sign in front of the grade value
Press/releasebutton3 a return to the standard display.
Quickly press and release button 4
toconrmtheselectedgradevalueandreturntothestandarddisplay.
Press and release button 5 or 8(downorup)tomovethecursortotheX-orY-axis(notusedinZ-mode)
Pressing and releasing button 6 or 7(rightorleft)movesthecursortotheright/left.
111560trimble_UL633_01_GB.indd 5 19.01.12 13:24
 previous next