Filter
Top Products
DS06 User Manual ◄ 15
Max
5/16"
Bottom of Bar
Figure 11. Exposed Drive Link Tang
SERVICING THE CHAIN
The following procedures explain how to break a chain
using Stanley’s bench mounted chain breaker (P/N
20858) to remove a worn or damaged segment.
1. Mount the chain breaker ush with the side or front
of a at, clean work surface (Figure 12).
Figure 12. Chain Breaker Mounting
NOTE:
The Stanley chain breaker is only designed to re-
move rivet heads from the connecting links, not
from a chain segment. The rivet heads shown in the
shaded areas of Figure 13 are the only ones that can
be removed.
Figure 13. Removable Rivet Heads
2. Place the chain (the portion that you want broken)
into the slot of the anvil pushing it forward until the
bottom connecting link is ush with the far side of
the slot (Figure 14).
Figure 14. Inserting the Chain
3. Position the rivet head you want removed directly
under the chain-breaker punch and then pull the
handle down far enough to remove the rivet (Figure
15). Do not use excessive force.
Figure 15. Removing a Rivet
MAINTENAN & ADJUSTMENTS