Filter
Top Products
DS06 User Manual ◄ 21
SYMPTOM CAUSE SOLUTION
No water discharge at bar. Blocked port(s) in bar. Turn off hydraulic supply. Remove bar
and chain and clean bar thoroughly.
Blow ports with compressed air.
Blocked inlet or outlet. Turn off hydraulic supply. Remove bar
and chain. Make sure water supply is on.
Press trigger to see if water exits near bar
adjustment nut area (a small port). If no
water exits, have unit serviced.
DIAMOND CHAIN APPLICATIONS
MODEL BAR LENGTH P/N CORRECT APPLICATIONS
Pinnacle- 13 inch Very hard aggregate concretes (int, chert, granite, etc). Heavy
steel reinforcing, 5/8 inch/16 mm diameter and larger. Medium/
hard aggregate concretes (granite, quartz, river rock, etc). Moderate
steel reinforcing (wire mesh 3/8-1/2 inch/10-12 mm diameter). Soft
aggregate concrete, concrete block, masonry, “green” concrete, highly
abrasive conditions.
Ultra- 13 inch Medium/hard aggregate concretes (granite, quartz, river rock,
etc). Moderate steel reinforcing (wire mesh 3/8-1/2 inch/10-12 mm
diameter). Soft aggregate concrete, concrete block, masonry, “green”
concrete, highly abrasive conditions.
TROUBLESHOOTING