Filter
Top Products
ASSEMBLY INSTRUCTIONS/OPERATION
SFCS-16 OPERATION AND PARTS MANUAL REV #3 (02/23/06) PAGE 14
Flip the blade over for use on wood surfaces. Specific
blades are available for removing covering materials
from either concrete or wood surfaces. This blade
design does not allow it to be flipped over for use on
both concrete and wood surfaces. FIGURE 6.
FIGURE 6
Straight Beveled Scoring Blades.
This blade configuration is utilized to remove glued
type carpet and soft sheet type (PVC, rubber,
linoleum, etc) materials from concrete and wood
surfaces. FIGURE 7. The cutting wings score the
covering material to aid in removal. Specific part
numbers are available for removing covering materials
from either concrete or wood surfaces. The blade
design does not allow it to be flipped over for use on
both concrete and wood surfaces.
Use of a straight beveled scoring blade with the
cutting wings positioned down and against the
work surface can result in unrepairable surface
damage and personal injury.
FIGURE 7
Ceramic Tile Ripper Attachment.
This attachment is designed for light to medium duty
projects requiring the removal of ceramic, thicker VCT
and linoleum tiles, hardwood floors, etc, from concrete
and wood surfaces. FIGURE 8.
FIGURE 8
The primary design function for the FLOOR
COVERING SCRAPER is not to remove ceramic
tile. Removing ceramic tile is a secondary job
application that may require the use of a machine
and/or process with significant greater stability,
power and/or impact force. The FLOOR COVERING
SCRAPER has demonstrated the ability to remove
ceramic tile for those job applications classified as
light to medium duty. An improper job application
for the FLOOR COVERING SCRAPER may result in
property damage and/or personal injury.
INSTALLING A BLADE OR THE CERAMIC TILE
RIPPER ATTACHMENT TO THE FLOOR
COVERING SCRAPER.
Tools required: 1 each, 5/32 inch T handled Allen
wrench provided with the machine.
Parts required: 1 each, blade appropriate for the job
application or the ceramic tile ripper attachment.
WHEN INSTALLING OR REMOVING A BLADE OR
THE CERAMIC TILE RIPPER ATTACHMENT
TO/FROM THE FLOOR COVERING SCRAPER
ALWAYS WEAR THE APPROPRIATE SAFETY
EYEWEAR, GLOVES, LEATHER SHOES AND
LONG PANTS TO MAXIMIZE PERSONAL
PROTECTION FROM THE SHARP EDGE (S).
IMPROPER CONTACT WITH A SHARP EDGE CAN
DANGER
CAUTION