Filter
Top Products
GB
7
TexPerfect Flexio 525
8. Preparation of the workplace
Sockets and plugs must be masked. Risk of an electric shock as a
consequence of sprayed material entering the socket!
Mask all the areas and objects that are not to be spray painted, or
remove them from the work area. No liability is assumed for damage
due to overspray. Silicate paint corrodes glass and ceramic surfaces
upon contact! All such surfaces must therefore be completely covered.
i
Pay attention to the quality of the adhesive tape used.
Do not use excessively strong adhesive tape on wallpaper and painted
surfaces, in order to avoid damaging these surfaces when removing the
tape. Remove adhesive tape slowly and evenly; do not use jerky movements.
Do not leave adhesive tape on surfaces any longer than necessary, in order
to minimise the possibility of residues when removing.
Also observe the adhesive tape manufacturer's instructions.
9. Preparing the wall
i
The spray result depends heavily on the smoothness and cleanliness of
the surface to be sprayed. Fine plaster cannot be used to level bumps or
holes in the wall. Therefore the surface should be carefully prepared and
kept free of dust.
Depending on the surface, it might be necessary to apply a suitable sealing primer/
undercoat before spraying the ne plaster on the wall. Please observe the information
about this that is provided by the manufacturer of the material.
10. Preparation of the Coating Material
i
Spray material that is at least at room temperature provides a better spray
result.
The Flexio 525 is perfect for spraying mansory paint, ne plaster, structured paint and
undercoats either undiluted or partially diluted. Detailed information is available in the
technical data sheet of the manufacturer ( Internet download).
1.
Stir the material thoroughly and dilute it in the container as per the recommended
dilution (an agitator is recommended for stirring).
Thinning recommendation
Sprayed material
Mansory paint, undercoats, sealing primer undiluted
Fine plaster dilute by 0-5%
Structured paint observe manufacturer's instructions