Filter
Top Products
GB
15
TexPerfect Flexio 525
Problem Cause Remedy
Paint in the
ventilating hose
•
Diaphragm soiled
•
Diaphragm defective
➞ Clean the diaphragm
➞ Replace the diaphragm
Poor covering
capacity on the wall
•
Spray material is too cold
•
Highly absorbent surface or paint
with poor covering capacity
•
Distance too large
➞ The material you are
spraying should be at
room temperature
➞ Cross spray (Fig. 9)
➞ Closer to the object
Device does not
function
•
Device overheated ➞ Unplug the power
plug, let the device
cool down approx. 30
minutes, check the air
lter, do not cover the
intake slots
22. Technical Data
Technical Data
Max. viscosity: 4000 mPas
Power source: 230 V,
~
50 Hz
Power consumption: 630 W
Atomizing output: 25 W (min), 200 W (max)
Max. ow rate (ne plaster): 450 g / min
Double insulation:
Sound pressure level*: 74 dB (A); Uncertainty K = 4 dB
Sound pressure output*: 87 dB (A); Uncertainty K = 4 dB
Oscillation level*: < 2.5 m/s²; Uncertainty K = 1.5 m/s²
Weight: 1.9 kg
* Measured in accordance with EN 60745-1
Information about the oscillation level
The specied oscillation level has been measured according to a standard test
procedure and can be used to compare against electric tools.
The oscillation level is also for determining an initial assessment of the vibrational
strain.
Attention! The vibration emission value can dier from the specied value when the
electric tool is actually in use, depending on how the electric tool is being used. It is
necessary to specify safety measures to protect the operating personnel. These measures