Filter
Top Products
GB
12
TexPerfect Flexio 525
5) Put the nozzle onto the gun body and nd the correct position by turning it.
6) Put the air cap onto the nozzle and tighten it using the union nut.
7) Place the container seal from below on the suction tube and slide it over the collar,
while turning the container seal slightly.
8) Insert the suction tube with container seal in the gun body.
18. Maintenance
WARNING! Never operate the machine without the air filter;
dirt could be sucked in and interfere with the function of the
machine. Check the air filter after each use for contaminants.
Disconnect plug before changing parts.
1) Open the air lter lid with the help of the stirring rod. (Fig. 14)
2) Pull out the air lter and replace it if necessary, depending on how soiled it is.
3) First, push the new air lter into the bottom part of the compartment. (Fig. 15)
4)
Next push it completely into the compartment.
In order to push the air lter into the compartment completely, we recommend using
the stirring rod.
In order to mount the gun more easily apply lubricating grease (enclosed) liberally
to the O-ring at the gun front part. (Fig. 16, 5 ).
19. Spare Parts
Spare Parts List: TexPerfect spray attachment (Fig. 16)
Pos. Designation Order No.
TexPerfect spray attachment complete with 1300 ml container 2345 792
1 Union nut 2343 966
2 Air cap 2343 965
3 Nozzle 2343 963
4 Nozzle seal (2 pcs.) 2304 433
5 O-ring 0417 308
6 Feather with cap 2343 967
7 Ventilating hose, valve cover, diaphragm 2304 027
8 Suction tube 2328 922
9 Container seal 2328 919
10 Container with cover 1300 ml 2305 155