Filter
Top Products
English
10
4. Practice
Spraying
Start
You will need:
• Scrap material / cardboard
Notes:
If the spray pattern becomes distorted or
stops completely while the gun is triggered,
follow any or all the procedures listed on
pages 12-14.
If you plan to be away from your spray
project for more than one hour, follow the
Short Term Storage instructions on page 15.
not be ideal for the type of material you are
spraying.
Spray
Tip
Size
Filter
Color
Spray
Material
Initial
Pressure
Setting
311 Red
Thin stains,
sealers
Minimum
313
Yellow
Latex paints,
stains
Maximum
413
415
515
517 White
Thick latex
paints, stains
Maximum
519 White
Thick latex
paints, stains
Maximum
521 White
Thick latex
paints, stains
Maximum
Hold the Spray Gun Level
Practice on a piece of scrap material/cardboard
Tip:
Trigger gun after starting the
stroke. Release the trigger
before ending the stroke. The
spray gun should be moving
when the trigger is pulled and
released. Overlap each stroke
by about 50%. This will ensure
an even coating.
10” - 12”
(25 - 30 cm)
10” - 12”
(25 - 30 cm)
CORRECT INCORRECT