Filter
Top Products
English
21
Cleaning the
Sureflo Valve
Start
You will need:
• Wrench
may be required if the unit has priming
problems. Priming problems may be
prevented by properly cleaning the sprayer
and following the long-term storage steps.
If priming problems persist, you may need
Technical Service (1-800-880-0993) to order
1. Remove the suction tube.
3. Lubricate the O-ring on the Sureo Valve (b) with
petroleum jelly.
Replace Sureo Valve assembly by screwing it into
the sprayer. Tighten with the wrench.
2. Unscrew the Sureo Valve assembly (a) from the
sprayer. Visually inspect the inside and outside
of the Sureo Valve assembly. Clean any paint
residue with the appropriate cleaning solution.
4. Replace suction tube and hand-tighten.
1
(a)
2
(b)
3 4