Xantrex Technology Freedom 458 Battery Charger User Manual


 
10
LINK 2000
The Link 2000 has the same features as
the Link 1000, providing inverter/charger
control and complete battery state of charge
information. It monitors two battery banks.
OPTIONAL REMOTE CONTROL PANELS
Freedom Remote Control Panel
An optional remote control panel is
available. The LED bar graphs on the remote
control panel show battery voltage and DC
current in both inverter and charger modes.
Easy-to-see red, yellow and green LEDs
show the battery state of charge. Power
Sharing, charger ON/OFF, inverter ON/OFF
controls are provided. Setup features include
selection of Idle Threshold, Battery Type and
Battery Capacity.
ADVANCED REMOTE CONTROL PANELS
Link Instrument
Advanced remote control panels are also
available: the Link 1000, 2000 and 2000-R.
LINK 1000
Link 1000 controls the Freedom Inverter/
Charger and provides complete battery
state of charge information including DC
voltage, current, amp hours consumed, Time
Remaining and historical data for a single
battery bank.
LINK 1000
LINK 2000
LINK 2000-R
The Link 2000-R adds the ability to
regulate an engine-driven alternator. The
precision regulator in the Link 2000-R allows
the alternator to be controlled as a three-stage
battery charging system.
If a Link Instrument is used to control the
inverter/charger, refer to the Link Owner’s
Manual for setup and control information.
The jumper is not installed in the AUX
Switch Port on the front panel of the
inverter when the Freedom Remote
Control Panel or Link Instrument is used.
See page 23 for more details.
Refer to the Freedom Remote Control Panel
or Link Owner’s Manual for
installation and operation instructions
Freedom Remote Control Panel