Xantrex Technology jazz 300 Welding System User Manual


 
11
Indicators and Controls (see Figure 1)
· Two AC outlets are provided on one end of the Jazz 300. Any combination of
120-volt AC products with a total continuous power consumption of 240 watts
or less may be plugged in.
· The ON/OFF switch enables output AC power at the AC outlets when switched
ON.
· The green POWER light indicates AC power is present at the two AC outlets and
the Jazz 300 is operating normally.
· The red FAULT light indicates inverter shutdown caused by low or high voltage,
overload or excessive temperature.
Inverter Operation
1. When properly connected to a 12-volt outlet or battery, turning the ON/OFF
switch ON, will illuminate the green POWER light, and deliver AC power to the
two outlets.
2. Plug the AC product(s) you wish to operate into the AC outlet(s) and switch
them on, one at a time.