Xantrex Technology jazz 300 Welding System User Manual


 
2
WARNING! Heated surface.
· The Jazz 300s housing may become uncomfortably warm, reaching 140°F (60°C)
under extended high power operation. Ensure at least 2 inches (5 cm) of air
space is maintained on all sides of the Jazz 300. During operation, keep away
from materials that may be affected by high temperatures.
WARNING! Explosion hazard.
· Do not use the Jazz 300 in the presence of flammable fumes or gases, such as in
the bilge of a gasoline powered boat, or near propane tanks. Do not use the
Jazz 300 in an enclosure containing automotive-type, lead-acid batteries. These
batteries, unlike sealed batteries, vent explosive hydrogen gas, which can be
ignited by sparks from electrical connections.
· When working on electrical equipment always ensure someone is nearby to help
you in an emergency.
CAUTION!
· Do not connect live AC power to the Jazz 300s AC outlets. The inverter will be
damaged even if it is switched OFF.
· Do not connect any AC load, which has its neutral conductor connected to
ground, to the Jazz 300.
· Do not expose the Jazz 300 to temperatures exceeding 104°F (40°C).