Filter
Top Products
Accessing Charger Information
975-0187-01-01 3–13
Reporting While Charging or Equalizing
After configuration, the XC Series defaults to a scrolling display. As long as there
are no faults or errors to report, the remote will display the following information,
in order, for the bank presently being charged:
• Charging Stage
• Battery Voltage
• Charger Current
If there is a fault or warning related to one of the banks, the fault or warning
information will display in the scrolling display before the charging state for the
bank presently being charged. Charging for banks not in fault will continue (see
“Error Messages on Remote Display” on page 4–4). Charging for the bank in fault
will resume once the fault condition is cleared.
Battery too hot fault Fault indicator light illuminated
100% current indicator light flashes
Battery too cold fault
Fault indicator light illuminated
10% current indicator light flashes
Charger fault condition.
The charger is damaged, contact service.
Fault indicator light flashes
Table 3-1
Reading XC Series Status
Charger Status
Remote
Display Onboard Status Indicator Lights
XC_Charger_Owner.book Page 13 Friday, August 12, 2005 3:23 PM