Filter
Top Products
– 23 –
AE00812
Application range
When using the generator, make sure the total load is within rated output of a generator.
Otherwise, generator damage may occur.
AC
Power factor 1 0.8 ~ 0.95
0.4 ~ 0.75
(Efficiency 0.85)
EF6300iSDE – 5,500W – 4,400W – 1,870W
NOTE:
9 “–” means below.
9 Application wattage indicates when each device is
used by itself.
9 The overload indicator light 1 comes on when
total wattage exceeds the application range. (See
page 11 for more details.)
cC
9 Do not overload. The total load of all electrical
appliances must not exceed the supply range
of the generator. Overloading will damage the
generator.
9 When supplying precision equipment, elec-
tronic controllers, PCs, electronic computers,
microcomputerbased equipment or battery
chargers, keep the generator a sufficient dis-
tance away to prevent electrical interference
from the engine. Also ensure that electrical
noise from the engine does not interfere with
any other electrical devices located near the
generator.
9 If the generator is to supply medical equip-
ment, advice should first be obtained from the
manufacturer, a medical professional or hospi-
tal.
9 Some electrical appliances or general-purpose
electric motors have high starting currents,
and cannot therefore be used, even if they lie
within the supply ranges given in the above
table. Consult the equipment manufacturer for
further advice.
1
763-7CKd
7CK-28199-10_a 08.9.15 17:47 Page 23