Yamaha EF6300iSDE Welding System User Manual


 
– 43 –
AE00515
Generator won’t produce power
Safety device (AC protector) to “Reset”····Press the AC protector to “Set”.
The voltage select switch in the wrong position····Turn the voltage select switch to
the right position.
A ENGINE DOES NOT START
B
Turn the engine switch to “ON”, then turn
the engine switch to “START”. And check
if the starter motor cranks.
C Cranks D Does not crank
F
Turn the engine switch to “START”, and
check if the oil warning light comes on.
G Does not come on H Comes on
L
Turn the engine switch to “START” and
check the spark plug for spark strength.
(See “WARNING”).
w
9 To prevent FIRE HAZARDS be
sure fuel is not present in the
spark plug area.
9 To prevent FIRE HAZARDS be
sure to place the spark plug
as far way as possible from
the spark plug hole and car-
buretor area.
9 To prevent ELECTRIC SHOCK
do not hold spark plug lead
with hand while testing.
M Engine does not start. N Engine starts.
R
Check the following
9 Fuel cock clogging
9 Air cleaner element
clogging.
SClogged
TOK
Clean or Replace; Consult a
Yamaha dealer.
U
V Consult a Yamaha dealer.
7CK-28199-10_b 08.9.15 17:13 Page 43