Filter
Top Products
– 38 –
6. Remove the bolts 1, and then pull outward on the
areas of front cover 2 shown.
7. Drain the fuel from the carburetor by loosening the
drain screw 1 on the carburetor float chamber.
8. Turn the engine switch to “OFF”.
9. Turn the fuel cock knob to “OFF”.
10. Tighten the drain screw.
11. Install the front cover and tighten the bolts.
1
2
788-7CKa
1
707-7CKd
12. Tighten further if any bolts and nuts are loose.
13. Store the generator in a dry, well-ventilated place,
with the cover placed over it.
7CK-28199-10_b 08.9.15 17:13 Page 38