Yamaha EF6300iSDE Welding System User Manual


 
– 37 –
AE00601
STORAGE
Long term storage of your machine will require some
preventive procedures to guard against deterioration.
763-120b
q
707-7CK
705-073b
ON
OFF
AE01056
Drain the fuel
1. Turn the engine switch to “STOP” 1.
2. Remove the fuel tank cap. Extract the fuel from
the fuel tank into an approved gasoline container
using a commercially available handsiphon. Then,
install the fuel tank cap.
w
Fuel is highly flammable and poisonous. Check
“SAFETY INFORMATION” (See page 1) carefully.
cC
Immediately wipe off spilled fuel with a clean, dry,
soft cloth, since fuel may deteriorate painted sur-
faces or plastic parts.
3. Turn the engine switch to “ON”
4. Turn the fuel cock knob to “ON”
5. Start the engine and leave it run until it stops.
The engine stops in approx. 20 mins. time by run-
ning out of fuel.
NOTE:
9 Do not connect with any electrical devices.
(unloaded operation)
9 Duration of the running engine depends on the
amount of the fuel left in the tank.
7CK-28199-10_b 08.9.15 17:13 Page 37